Intellipet In-Ground Dog Fence System

Intellipet In-Ground Dog Fence System


Limited Availablity. Order Now, Usually Ships within 24 hours.
Shipping weight = 5.00 lbs.


This product may only be purchased with the approval of a veterinarian and may require verification. We will collect any necessary information at checkout and verify a prescription if required.


Sometimes, manufacturers require that products be advertised only at their suggested prices. When we choose to sell these items for less, we display the sale price only in the cart. To see the price, click Add to Cart.

Product Summary:

Intellipet In-Ground Dog Fence System

Prevent your dogs from being a nuisance to your neighbors, and stop them from wandering beyond safe limits using the Intellipet In-Ground Dog Fence System. This system comes with an easy to install wire that can be set up to create a boundary of sorts. You can put the lightweight and water-resistant collar of this system on your dog’s neck. When your dog tries to cross the boundary, a harmless yet effective electrical stimulus is delivered stopping him and training him to not cross the boundary. This system also comes with boundary flags and other necessary elements.

Product Features:

  • This system lets you train your dogs to stay within a set boundary
  • It comes with an easy-to-install wire, two sets of collar probes, boundary training flags, and a training guide
  • The system uses a wall-mounted transmitter to deliver the signal
  • Your dog receives a totally harmless yet effective electrical stimulus when he tries to cross the boundary
  • The collar is adjustable, and the whole system is lightweight and water-resistant

Item Specifications:

Suggested Breed Size:
Appropriate for dogs 8 lbs and over and/or 6 months old and up.

Operating Instructions:
Use care when mowing or trimming your grass not to cut the loop wire.
For added protection unplug from the wall outlet and disconnect the loop boundary wires when unused for long periods of time or prior to thunderstorms.This will prevent damage to the transmitter due to surges.
Always use the rubber insulators between the collar strap and probes to provide insulation in damp conditions.
Other collars and metal tags should be removed as they may interfere with proper operation.
Do not attempt to dismantle or repair any components of this system; doing so will void the warranty in full. The computerized circuitry should be serviced only by an authorized expert.

Step 1 Design your fence:
Have the local utility companies mark your underground lines. On a sheet of paper, draw your house and yard. Draw a line around your property that represents the containment area for your dog.
Step 2 Install the wall-mount transmitter:
Most people find that the inside of an exterior wall of a garage or basement is ideal. From the sample layouts included, you can see the twisted wire running from the house attaches directly to the transmitter.
Step 3 Layout the fence wire:
Run the containment wire around the property as outlined in your plan.
Step 4 Final connections:
Splice the containment loop wires to the twisted wire using the supplied waterproof splices. Connect the other end of the twisted wire to the wall-mount transmitter. Plug the AC adapter, connect it to the transmitter and turn it on. The red light should illuminate on the transmitter indicating a successful loop.
Step 5 Power Up:
Install batteries positive side out as shown.
Step 6 Test your fence:
Set your FIELD WIDTH ADJUSTMENT KNOB to the number 2 position. Using the supplied test light, walk the dog’s collar up to the fence wire. Listen for the warning tone and look for the test light to light. Try a number of different places around the fenced area, in order to verify the range is consistent.
Step 7 Bury fence wire:
Dig the trench 1"-3” deep with a flat edge spade. Or, it is faster to use a gaspowered edger. Digging the trench at an angle helps keep the wire in the ground as you place it. Place Flags at edge of selected boundary field, where the warning tone is first heard – NOT at the wire.
Step 8 Train your dog
Follow the training steps outlined in the Training and Troubleshooting Guide. You may see your dog respond immediately to the training, however continue to follow the Training Guide to fully train your dog. The convenience that your new fence offers, plus the added safety for your dog are well worth the time invested.

This Intellipet In-Ground Dog Fence is not a solid barrier. This system is designed to act as a deterrent to remind pets by Static Stimulation to remain in the boundary established. It is important that you reinforce training with your pet on a regular basis. Proper fit of the collar is important. A collar worn for too long or made too tight on the pet’s neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores.
Avoid leaving the collar on the dog for more than 12 hours per day.
When possible reposition the collar on the pet’s neck every 1 to 2 hours.
Check the fit to prevent excessive pressure; follow the instructions in this manual.
Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.
When using a separate collar for a lead, don’t put pressure on the electronic collar.
Wash the dog’s neck area and the contacts of the collar weekly with a damp cloth.
Examine the contact area daily for signs of a rash or a sore.
If a rash or sore is found, discontinue use of the collar until the skin has healed.
If the condition persists beyond 48 hours, see your veterinarian.

Not for use with aggressive dogs. Do not use this product if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury or death to their owners and others. If you are not sure that this product is right for you r dog, please talk to your veterinarian or a certified trainer.
Underground cables can carry high voltage. Have all underground cables marked before you dig to bury your wire. In most areas this is a free service. Avoid these cables when you dig.
Follow all safety instructions for your power tools. Be sure to always wear your safety goggles.
Do not install, connect, or remove your system during a lightning storm. If the storm is close enough for you to hear thunder, it is close enough to create hazardous surges.
Risk of electric shock. Use the Fence Transmitter indoors in a dry location only

This product is warranted against defective material or workmanship for one year from the date of purchase. Any product that is determined to be defective in material or workmanship during the warranty period will be repaired or replaced without cost to the purchaser for parts or labor. Please contact PetEdge Customer Service at 1-800-638-5754 regarding any defective product. PetEdge will not be liable under this warranty for any defect, failure or malfunction of this product caused by normal wear, abuse, misuse, unauthorized adjustments or repairs. PetEdge will not be liable for any incidental or consequential damages of any type. Any implied warranty is limited to the one-year period provided in this express warranty. Some states do not allow limitations on how long an implied warranty lasts or exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.Warranty is void if product has been modified in any manner,repaired by anyone other than PetEdge or has been subject to unreasonable use.Warranty is valid in the United States.

Receiver Collar weighs 2 1/2’’ oz.

Product Reviews by Customers